Epiphone IGC Pre-War SJ-200 Rosewood Reissue Vintage Sunburst w/ Hard Case

Serial Number 25041500939

- Authorized Dealer - This item is Brand New with Full Factory Warranty.

- The photos shown are of the actual instrument being sold.

- Our luthiers at Fuller's Guitar thoroughly inspect and set up each instrument to factory specification action and neck relief prior to shipping to make sure that your new instrument is gig-ready right out of the box.

- Buy risk-free with our 14 day return policy (full refund, less shipping). Check out our shop policies for more details.

Solid rosewood back and sides, thermally aged solid spruce top, two-piece maple neck with rosewood stringer and Round D profile, ebony fretboard with mother-of-pearl graduated Crown inlays, gold Grover Imperial tuners, L.R. Baggs VTC electronics, Red Line-inspired hardshell case with Inspired by Gibson Custom graphics.

Setup Included
Free & Fast Shipping
Case Included
Limited Lifetime Warranty

Inspired by Gibson Custom’s Pre-War King of the Flat-Tops
After the Gibson SJ-200 was launched in 1937, it quickly earned the title “the King of the Flat-Tops” due to its superior sound, physical size, outstanding projection, and majestic appearance. The earliest model years of the SJ-200 used rosewood for the back and sides, and this was switched to maple in 1947. Due to the harsh realities of the economy after the Great Depression, there was limited demand for the top-of-the-line SJ-200, and consequently, relatively few were produced. The rare rosewood-bodied pre-war SJ-200 models have become highly prized by today’s collectors, which has driven their used prices up significantly on the vintage guitar market. Now, Epiphone has partnered with Gibson Custom to create an Inspired by Gibson Custom recreation of this vintage icon, making it more readily available for today's players to enjoy. The Epiphone Pre-War SJ-200 Rosewood Reissue is replete with vintage-inspired details, including solid rosewood back and sides, a thermally aged solid spruce top with traditional scalloped X-bracing made from quarter-sawn solid spruce, and a two-piece maple neck with a rosewood stringer and Round D profile and is attached to the body with a glued-in dovetail joint. The ebony fretboard is adorned with mother-of-pearl graduated Crown inlays and equipped with 20 standard frets. The SJ-200 style pickguard has vintage-style graphics, and the ebony SJ-200 open two-bar Moustache™ bridge has mother-of-pearl inlays. The nut, compensated saddle, and bridge pins are all made of bone. The Gibson “open book” headstock features a vintage Epiphone logo and a Gibson Crown inlaid in aged mother-of-pearl and has a stinger and an Inspired by Gibson Custom Double Diamond logo etched on the rear. In a nod to the needs of modern musicians, it comes with an under-saddle L.R. Baggs™ VTC piezo pickup and active preamp with soundhole-mounted volume and tone controls pre-installed, so it is stage and studio ready, straight out of the included Red Line-inspired hardshell case with Inspired by Gibson Custom graphics.

Highlights
Rosewood back and sides
Thermally aged solid spruce top
Two-piece maple neck with rosewood stringer
Bound ebony fretboard with mother-of-pearl graduated crown inlays
Grover imperial tuners
Two bar moustache bridge with mother-of-pearl inlays
L.R. Baggs VTC under-saddle piezo pickup and active preamp
Red line-inspired hardshell case with Inspired by Gibson Custom graphics

Specifications

Body Specs
Back Solid Rosewood
Binding Multi-ply Top, Back, and Headstock, Single-ply Fretboard
Body Finish Vintage Gloss
Body Material Solid Rosewood
Body Shape SJ-200
Body Styles Jumbo
Bracing Traditional Scalloped X-Brace; Quarter Sawn Solid Spruce
Side Solid Rosewood
Top Thermally Aged Solid Spruce

Neck Specs
Fingerboard Material Ebony
Fingerboard Radius 304.8mm / 12.0in
Fret Count 20
Frets Standard
Inlays Mother of Pearl Graduated Crown
Joint Glued In, Set Neck; Dovetail Joint
Neck Material 2-piece Maple with Rosewood Stringer
Nut Material Bone
Nut Width 44.2mm / 1.74in
Profile Rounded D
Scale Length 647.7mm / 25.5in

Electronics Specs
Controls Soundhole Mounted Volume and Tone
Output Jack 1/4" Endpin
Preamp L.R. Baggs VTC
Under Saddle Pickup L.R. Baggs VTC

Hardware Specs
Bridge Ebony SJ-200 Open Two Bar Moustache with Mother of Pearl Inlays
Bridge Pins Bone
Pickguard SJ-200 with Vintage-style Graphics
Saddle Material Compensated Bone
Strap Buttons Endpin Jack
Truss Rod Dual Action
Truss Rod Cover 2-ply Black, Wide White
Tuner Plating Gold
Tuning Machines Grover Imperial

Misc Specs
Case Red Line-inspired Hardshell with Inspired by Gibson Custom Graphics
Model: ECPW200VSGH1
Headstock Gibson Open Book with Stinger and Inspired by Gibson Custom Logo on Rear
Headstock Inlay Vintage Epiphone Logo and Gibson Crown in Aged Mother of Pearl
Strings Gauge .012, .016, .024, .032, .042, .053